Combustion device equipped with air shutter that closes automatically after
Heater ignition to protect the device from the hole that
Usually occurs in heaters equipped with manual shutter
Single speed turbine for hot air circulation
High-quality thermal coating baked in oven
Complete nozzle device to protect the font from burning, damage, and ease of maintenance
Wide crystal interface size: 143×254 mm ×4
02. Operating Instructions:
Fill the tank with clean kerosene up to the line inside the filter
Connect the heater cable to the electrical outlet (220V)
Set the regulator indicator to the middle after calibration
Place the wick inside the device (helps with ignition)
Open the kerosene valve 4 complete turns
Light the wick inside the device
To get hot air, turn on the turbine fan after 20 minutes of heater startup
03. Important Notes:
The heater legs must be adjusted to be completely level and lock the adjustment after calibration
Attention must be paid to the heater standing level on the ground to ensure the kerosene regulator (carburetor) works correctly
On sunny days, place a small piece of cloth soaked in kerosene in the shape of a ball in the chimney pipe before operation to speed up the ignition process
Empty the kerosene tank and dry it with a cloth at the end of winter
Chemical materials or water are prohibited for cleaning the combustion device to prevent device damage
Alhilal
