Automatic operation for all heater operation stages with one touch
Control via device or touch keys
Turbine fan with two speeds for hot air circulation
Fan shutter helps with fast ignition
High-quality thermal coating baked in oven
Complete nozzle to protect the font from burning
Wide crystal interface (143×254 mm × 4 mm)
02. Operating Instructions:
Fill the kerosene tank with clean kerosene up to the line inside the filter
Connect the heater cable to the electrical outlet (220V)
Set the regulator indicator to the middle after calibration
To ensure the kerosene regulator (carburetor) works correctly
Press the start button on the control device to run the program automatically for 15 minutes starting with the igniter, then the fan shutter, then the turbine fan
Open the kerosene valve 4 complete turns
You can intervene at any moment to stop the circuit program and control the flame, fan shutter, or turbine speeds as needed
If the heater does not ignite, raise the regulator indicator two levels then press the start button again
Do not repeat this process more than twice consecutively (causes igniter damage)
The reason for non-ignition may be dirty kerosene, chimney draft, or weak electricity
03. Important Notes:
The heater legs must be adjusted to be completely level and lock the adjustment after calibration
Attention must be paid to the heater standing completely level on the ground to ensure the kerosene regulator (carburetor) works correctly
On sunny days, place a small piece of cloth soaked in kerosene in the shape of a ball in the chimney pipe before operation to speed up ignition
Empty the kerosene tank and dry it with a cloth at the end of winter
Chemical materials or water are prohibited for cleaning the combustion device
Alhilal
