Back to product

Reference sheet

Copper Accent Heater

AH-CPR-40

Reference sheet details

Detailed specifications, operating steps, and safety notes extracted from the product reference sheet and translated for this page.

Product
Copper Accent Heater
Model
AH-CPR-40
Alhilal heater with warm copper accent details
Heating area
Up to 72 m²
Fuel consumption
0.23 - 0.36 L/hr

Product sheet specifications

01

Copper-accent round model

  • Body thickness 0.8 mm.
  • Heater height 83 cm.
  • Total heater weight 12.7 kg ± 2%.
  • Average heating area 30 m² ± 20%.
  • External diesel tank, 5 liter capacity.

Features

  • The combustion unit includes an air sharraq that closes automatically after ignition, protecting the unit from punctures commonly caused by manual-sharraq devices.
  • The full mouth of the combustion unit is made from cast iron to protect the unit from damage and simplify maintenance.
  • High-quality European porcelain coating.

Operating details

02

Filling the diesel tank

  • Fill the heater tank with clean diesel until the level reaches the middle line of the diesel filter without exceeding it.

Chimney sharraq

  • On sunny days, and to remove cold air collected inside the chimney, take a cloth piece, fold it into a small ball, wet it with diesel, and light it inside the heater elbow.
  • This step is known as chimney sharraq. It is necessary to warm the chimney and speed up ignition.

Preparing the ignition wick

  • During the first operation, place the supplied wick thread under the combustion unit to make ignition easier.

Opening diesel flow

  • After finishing the chimney sharraq step, open the tank valve until the bottom of the combustion unit fills with a small amount of diesel, about a quarter of a coffee cup, then close the valve.
  • Confirm diesel has reached the unit by looking below the combustion unit.

Lighting the heater

  • Using the dedicated lighter or a match, ignite the diesel inside the combustion unit, then close the heater door and cover tightly.
  • After the fire ignites and rises above the nozzle level, open the tank valve and monitor the diesel quantity. It should not be too low to prevent soot formation.

Care and safety notes

03

Care reminders

  • Use clean diesel and do not fill above the middle line of the diesel filter.
  • After ignition, monitor the diesel quantity so the flame remains stable and soot does not form.
  • The automatic air sharraq protects the combustion unit after ignition, but the heater should still be checked during operation.
Extracted from the product reference image